These coolers allow for the use of Opticlimate Water Cooled Climate Control Systems without the need to connect to a mains water supply. ie. the system is in its own closed loop and no water goes down the drain.

A pump is included with every water cooler. However you will need to purchase 3-core mains cable and 2 x 13amp uk plugs in order to wire this into the (not included!) You'll need two plugs because, there will be one for the fan (that's on the chiller) and one for the pump. 

Note: you WILL need a if you are twinning this chiller with a revo max. 

Vertical Compact Coolers

Small and lightweight water chiller, ideal for small spaces in residential and commercial buildings.

Capacity: from 4 to 53 kW
Tube diameter: 3/8" smooth inner surface (S) and grooved inner surface (R)
Fin spacing: 2.1 mm
Fan motor diameters: 350 mm - 4 and 6 poles
Available number of fan motors: from 1 to 2 x 3 fan motors
Available in different sizes and capacity cooling:

4.5 kW: 650 x 320 x 410 5kg (1 fan)
9 kW: 1200 x 320 x 410 9kg (2 fans)
14 kW: 1720 x 320 x 410 15kg (3 fans)
18 kW: 1170 x 320 x 810 16kg (2 fans)
32 kW: 1770 x 320 x 810 26kg (2x2 fans) 

The water cooler cools the hot water produced by the OptiClimate system with glycol. Since the water cooler works with a closed system, there is no evaporation. The water cooler cools by transferring heat from a liquid to colder ambient air, so the water cooler unit must be placed outside. This system only needs to be filled once. The water or glycol remains inside the system.

• Energy consumption is low
• Very long distances can be achieved between the indoor and outdoor units
• Air conditioning engineers and cooling gas are no longer required
• Very quiet in operation from 28 dB(A)
• Fully closed system (no water consumption once the unit is filled)
• Multiple indoor units can be connected to 1 suitably sized outdoor unit