These Seconda series solenoid valves are 2-way normally closed with either 3/4" or 1"  BSP female threaded inlet and outlet ports.  You'll likely need to extend the wire on your solenoid as well, so get some and these .  If you can't be arsed to build all the connections from the pump, get yourself the ! We've done it for you.

Note: Don't get hung up on the second or third series! The third series you might see available at other shops are food-grade applications - we don't sell them and you won't really need them, but just in case you were scratching your head (as we were at first!)

• Operating pressure range of 0.5 – 10 bar (or 7 – 145 psi) 
• 24v AC
• Manual override which can be used when electrical power is not available.

The solenoid valve is moulded polyamide made of 30% fibre glass which provides a durable yet lightweight valve. The diaphragm seal, solenoid armature seal and O-rings are produced in NBR (Buna). Internal metal parts are produced in stainless steel. Construction of the valve uses screw fixings to allow for in-service inspection and cleaning when required.

The Seconda Series are available in normally-closed, normally-open and latching (bistable) versions.

The Seconda Series solenoid valves are efficient and durable providing a cost-effective and reliable method of controlling water flow in a wide range of uses, including but not limited to small-scale irrigation of terraces, greenhouses and nurseries, ornamental water features and small gardens.