The TrolMaster Aqua-X pro-Irrigation Control System (NFS-2) is one of the most advanced irrigation controllers available today. The NFS-2 is a multi-functional controller which can control multiple irrigation solenoids and pumps. The NFS-2 can also monitor multiple water sensors that can measure pH, EC / PPM, temperature and water content sensor.

There is also a new optional DFW-1 flow meter that serves multiple functions. Each of the solenoids and pumps can be “linked” to work together so that multiple growing areas can be controlled by a single NFS-2.

When combined with the optional AMP-3, and sensors and the new DFW-1 flow meter, the NFS-2 allows the user to monitor up to 50 sensors and receive mobile notifications if a problem is detected by the system. The NFS-2 was created to allow users to customise their irrigation cycle and be able to control the irrigation events by using either the DFM-1 digital flow meter,  or moisture content sensors or by simple timers. Each device controlled by the NFS-2 can conceivably have an unlimited number of irrigation “events” each 24-hour day.

TrolMaster Aqua-X Pro Irrigation Control System Features:

• 10’ touch screen – Phone monitoring (TM+) & web-based controlling
• Increased Product Capacity of up to 300 pumps and 300 solenoids
• Expanded Irrigation Schedule up to 50 individual schedules
• Multiple reservoir monitoring on pH, EC, and Temp (with AMP-3)
• Medium EC, Temp and Moisture monitoring (with WCS-2)
• Water consumption Volume monitoring (with DFM-1)
• Feed on Demand
• Feed by volume
• Auto-fill in the reservoir
• Calendar control for multiple days preset schedules
• Flexible Master pumps connections

Specification:Input Voltage: 100-240V

• Certifications: ETL/FCC
• Degree of Ingress Protection: IP20
• Max Distance to Device to be connected: 1000 meter
• Nutrient Sensors (AMP-3, DFM-1, WD-1): Max 50 pc
• Medium Sensors (WCS-2, WCS-1): Max 50 pc
• PUMPS (OA6-24, OA6-110, DSP-1, DSD-1,DSE-1, OM-8): Max 50 pc
• VALVES (OA6-24, OA6-110, DSP-1, DSD-1,DSE-1, OM-8): Max 50 pc
• Working Environments Temperature 32-122°F, Humidity≤90%

For best results, we recommend setting this up in line with the instructions provided 

Aqua-X Components You Might Like (or will need!)

•  - the main unit you need to connect everything
•  - logs and graphs moisture content in medium (needed to check dry backs!)
•  - logs and graphs EC in your reservoir
•  - logs and graphs PH in your reservoir
•  - mainly used to check for run-off EC
• Aqua-X Inline pH Sensor (PPH-2) - mainly used to check for runoff PH
• Aqua-X Sensor Board for Irrigation Control System (AMP-2) - you will need this if you want to use any of the EC or PH sensors!
• Program Timer Module / Program Device Station (DSP-2) - to set timers for pumps