Produces up to 3000 L/d - No waiting produces up to 125 L/h!

• Eliminates up to 95% of salts and heavy metals.
• It helps to stabilize the pH.
• Eliminates up to 99% of Chlorine. -Lower the EC.
• Improves fertilizer performance and protects
• Avoid nutrients lockout.
• More food for your plants
• Uninhibited photosynthesis
• Better performing grow room equipment

CHANGE FILTERS: 6 months - 2 Years (depending on usage and input EC level), every 6 months

• Reverse Osmosis (RO) Filters
• Removes 95% of salts 
• Eliminates 99% of chlorine and reduces sediments to 5 microns
• Stabilizes pH
• Improves nutrient feed concentration
• Protects healthy soil bacteria & microorganisms
• Encourages plant growth, healthier fruits & stronger roots
• Protects reflectors, carbon filters & bulbs from mineral deposits
• Easy to set up - ready to use out of the box
• Connect it to a tap or pipework

Do you Need a Booster Pump?

RO filters need a water pressure of at least 40 PSI, but for best results, aim for 60 – 80 PSI.

As tap water pressure varies,  you may need a booster pump – it’ll raise your water pressure by 15 - 50 PSI, depending on your tap water quality. 

IMPORTANT: A minimum of 2.75bar 40 psi is required to operate the system properly. To increase water pressure, a booster pump kit is available separately. Do not install the system where the incoming water pressure higher than 5.5bar / 80psi. Pressure can be reduced by installing a pressure regulator. Only use with cold water supply, hot water will damage the filters and membrane. Protect unit against frost.