The Starter Kit contains a filter to protect your system ; the neccesary valves so you can carry out maintanence on your filter; a secondary output for water (e.g to make up stock concentrate); check valves. 

Here's what's included and why it’s a must-have:

Key Features

• Protective Filter: Shields your system from debris and contaminants, ensuring longevity.
• Maintenance Valves: Makes it easy to carry out filter maintenance without disrupting your system.
• Secondary Water Output: Convenient for tasks like making up stock concentrate or other uses.
• Check Valves: Prevents backflow and ensures the system operates reliably.

Important Details

• Compatible Design: Works with any booster water pump.
• No Pressure Regulator Included: This kit doesn’t come with a pressure regulator, as it's not needed with pumps like the DAB pump, which provide constant, preset output pressure.
• Pressure Advisory: For systems without a DAB pump, ensure your pump doesn’t exceed 85psi, as higher pressures can damage your injectors.

Note

The parts you receive may look slightly different from the displayed images, but their fit and function will remain the same.

You can purchase the  - and save money to boot! Or, you can buy the 3 components separately (, 4 x and ) 

Documentation

• Mixing Chamber Guide

Instructions

1. Wrap 5 to 6 turns of PTFE Tape on all threads. Make sure to wrap clockwise to prevent the tape from unravelling
2. Connect the ¾” x ¼” Reducing Nipple to one port of the cross, followed by the pressure gauge and set aside.
3. Connect a Barrel Nipple to the union side of a ¾” PVC Single Union Threaded Ball Valve then connect an elbow to the Barrel nipple.
4. With the arrow facing down, connect the ¾” BSP Male Y Filter (39-00-20) to the ¾” PVC Single Union Threaded Ball Valve.
5. Add the female socket (021.013.03) to the other end of the Y filter (39-00-20).
6. Attach the cross assembly to the Barrel Nipple
   
7. Insert a Hexagon nipple (021.273.03) on each of the two openings left on the Cross.
8. With the union side up, attach the Ball Valve to the bottom Nipple and connect the hose adaptor to the Ball Valve.
9. Attach an elbow to the Nipple in the centre of the Tee and attach a Barrel nipple  to the elbow.
10. With the arrow facing up, connect the Check Valve (021.673.03Q) to the Barrel